Fox T-Bird/Cougar Forums

Technical => Body/Appearance/Interior => Topic started by: 86 night cat on October 27, 2006, 03:13:10 PM

Title: center consoles
Post by: 86 night cat on October 27, 2006, 03:13:10 PM
I don't like the 1/2 console in my 86, i am curious if it can be disconnected from the driver's seat and removed. also, once removed, would a full console fit in the spot.  my seats are fine with good upholstery, and i see no reason to replace them if not needed.
any ideas?
Title: center consoles
Post by: 83Heritage on October 27, 2006, 03:28:38 PM
The info that you seek is here.  http://www.coolcats.net/stockmod/modified/console.html
Title: center consoles
Post by: 86 night cat on October 27, 2006, 04:03:53 PM
Beautiful, thank you. doesn't get much more step by step than that. thanks!
Title: center consoles
Post by: vinnietbird on October 27, 2006, 04:11:22 PM
I cut my half console off years ago and installed a full length console and factory floor shifter.Love it.
Title: center consoles
Post by: Ifixyawata on October 27, 2006, 06:13:04 PM
I got lucky when I did mine.  I was fortunate enough to have a plain seat-base to use in place of the one with the console welded to it.