Fox T-Bird/Cougar Forums

Technical => Body/Appearance/Interior => Topic started by: 84 Fila on October 10, 2006, 10:46:58 PM

Title: Are these factory?
Post by: 84 Fila on October 10, 2006, 10:46:58 PM
(http://memimage.cardomain.net/member_images/6/web/2322000-2322999/2322669_66_full.jpg)
Ok, I think this is susposed to be a luggage rack on my car. Is this factory? Because if it is it looks to be a piss poor job of someone fixing it. Looks like 2 side tape and a few screws? Should I leave it on or rip that shiznit off?
Title: Are these factory?
Post by: cougrrr302 on October 10, 2006, 10:55:38 PM
Rip The shiznit Off:sawzall:

IMO it would look better without it.
Title: Are these factory?
Post by: 84 Fila on October 10, 2006, 11:04:57 PM
I had that feeling too but if it's some option that will add value to the Fila then I might.
Title: Are these factory?
Post by: Nate on October 10, 2006, 11:08:49 PM
i'd get a new deck lid. if you rip it off, you'll have to strip off the tape, and fill the holes in the deck lid so it dosnt leak, or put the screws back into the hole untill you can weld them up and fix it. tho for the ammount of work, it may be easier to just replace  it.  i personaly hate them, and would never pile junk on my deck lid and drive around.
Title: Are these factory?
Post by: 84 Fila on October 10, 2006, 11:12:53 PM
I need a new decklid anyways as this one is starting to rust. But is this a factory option or some retarted mans dream of something that looks good
Title: Are these factory?
Post by: Nate on October 10, 2006, 11:16:34 PM
as far as i know, this should be a dealership install. but if you replace the deck lid, you can always keep it ,if it's of any value with the car.
Title: Are these factory?
Post by: 84 Fila on October 10, 2006, 11:24:34 PM
That is so simple, It just might work. Untill I have the time/money what should I do though? Just say the hell with it and rip it off or leave it on?
Title: Are these factory?
Post by: 88turbo on October 10, 2006, 11:34:11 PM
I vote to find another deck lid and keep that one aside.
Title: Are these factory?
Post by: Vantage08 on October 11, 2006, 12:36:53 AM
thats probably factory, yeah listen to Nate, put a different lid on and keep the lid somwhere. I threw out my old matching floor mats..stained bad but i think it might of been more money o well.
Title: Are these factory?
Post by: tbirdscott on October 11, 2006, 02:23:26 AM
Till you find a new one I say leave it alone, just a waste of time on something you'll be replacing anyway, spraypaint it white if it makes you feel better.
Title: Are these factory?
Post by: 84 Fila on October 11, 2006, 08:42:44 AM
So we all vote new lid?
Title: Are these factory?
Post by: Thunder Chicken on October 11, 2006, 09:53:06 AM
I'd say they're not factory simply because they don't follow the lines of the trunk. If they were factory they'd be made for that trunk lid, and therefore they'd be sized for it - longer at the outer edges and getting narrower toward the center. If you look at the two innermost ones they look like they just barely fit on the trunklid at all.

I vote new trunklid, and truthfully I wouldn't even bother hanging onto the old one if it's rusted out...
Title: Are these factory?
Post by: BCA on October 11, 2006, 10:09:51 AM
Quote from: 84 Fila;107889
Ok, I think this is susposed to be a luggage rack on my car. Is this factory?


There was no luggage rack option on the '83-'88 Thunderbirds. There were many installed by dealers as an aftermarket accessory but they were not a factory installed item.

Brent
Title: Are these factory?
Post by: EricCoolCats on October 11, 2006, 10:18:04 AM
Brent is right. To add to that...all luggage racks, front license plate holders, full mock tops, and striping packages (Blue Max/Special Edition, etc.) were dealer add-ons or added at a specialty shop for the dealer.
Title: Are these factory?
Post by: 84 Fila on October 11, 2006, 11:33:11 AM
So just rip the ugly ass thing off and replace the trunk lid later?
Title: Are these factory?
Post by: 4mykid on October 11, 2006, 12:15:08 PM
I think it boils down to...what do YOU want to do with it? Do what ever makes your thing ding and go with it.
Title: Are these factory?
Post by: 84 Fila on October 11, 2006, 12:35:21 PM
I just don't want to make a bad decision. I think I'll rip it off for now, see how bad it is and then replace it when I have the time/money. Paint/body *should* be this winter anyways
Title: Are these factory?
Post by: shorangerbird on October 11, 2006, 01:34:36 PM
-i vote new lid.
Title: Are these factory?
Post by: 84 Fila on October 16, 2006, 03:47:36 PM
Ok, body shiznit is in the spring, leave them on for now. New lid later.
Title: Are these factory?
Post by: 86elan on October 16, 2006, 06:13:40 PM
If you really hate them that much and you are getting a new lid at some point, rip them off and use clear silicone to fill the holes.
Title: Are these factory?
Post by: 84 Fila on October 16, 2006, 10:43:35 PM
Sounds good to me. I'll keep you guys posted. I've got to do some finish wiring, run / correct some vac. lines then rip that shiznit off and it should be good enough for me.
Title: Are these factory?
Post by: DVP on October 17, 2006, 05:06:38 PM
Quote from: Vantage08;107913
thats probably factory, yeah listen to Nate, put a different lid on and keep the lid somwhere. I threw out my old matching floor mats..stained bad but i think it might of been more money o well.


i think i have mine and they are stained but worrth money? never though about that, and i use them for winter
Title: where u at?
Post by: JAMEZILLA on October 30, 2006, 06:57:33 PM
Where are you located? I have a white 88 T-bo coupe I'm partin' out. only stuff I'm keepin' is the red leather interior ( sweet!) the 3.55 disc rearend and the original ground effects. The lid I have is rust free and still all white, ( ah-Ite!)There is awing on it, but the driver's side corner is chipped off. I bought a brand new on Ebay for $35 shipped! If you're close or willin' to pay whatever the shipping is you can have it for $25. Or I'll just get you the guy's ebay name I got my wing from, you can rip than REALLY NICE luggage rack off, use some KRUDCUTTER adhesive remover ( walmart has it by their paint) putty the holes and hide'em with a wing, + bonus it's white so it's VERY forgiving to a little less than great body work. Either way-Dis-Dat- shiZzle,-  I'm sure you're never gonna haul your stuff around on it...Right?
Title: Are these factory?
Post by: dominator on October 31, 2006, 04:08:45 PM
88 trunk lid won't work on an 84.