Skip to main content

Show Posts

This section allows you to view all Show Posts made by this member. Note that you can only see Show Posts made in areas you currently have access to.

Messages - dimon

1
Electrical Tech / Calibrate or mode select on digital bar kluster
Quote from: Thunder Chicken;281415
It is quite easy to change the calibration of the digital tachometer, in fact you don't need to modify the cluster at all. The digital tachometer is calibrated by adding or removing grounds to two terminals (called "tach strap 1" and tach strap 2") on the back of the cluster. To make your digital tach work with a V8 you will need to add a ground to the tach strap 1 pin in the back of the cluster. Here's the breakdown:

ground tach strap #1=V8
ground tach strap #2=4-cyl.
ground neither=V6

Tach strap 1 and 2 are terminals 8 and 9 in the grey plug on the back of your cluster. Ground terminal 8 and make sure nothing is connected to terminal 9 and your cluster will be calibrated for a V8.


Many thanks!
5
Electrical Tech / HVAC compressor on with heat
I have  solve the problem on my t-bird by replacing relay in ventilator control module. The old one have welded contacts- the AC system were switch on all time during run. The current in the circuit is quite large for this small relay . Something like this  http://www.brownbear.ru/goods/8711.html
It is necessary to find strong relay, rated 20+A. I have take from old security system board.
6
Body/Appearance/Interior / t-bird PC
Quote from: Seek;274331
I'm curious - did you have to trim the hvac ducts to get that LCD in there? Having a built-in pc would have its advantages but also disadvantages as I'd want to replace the entire stereo with it but boot times suck compared to instant on headunit and I would have to run Windows so Linux wouldn't be an option. Looks good with exception of the missing duct for the passenger.

Is that a 7" screen?

 Missing duct for Russian climate is no problem. I use  7” monitor PROLOGY PCM 700 with self-made case. There is no buttons, only IR input. The monitor is connected to ACC line and programmed for auto power on. The monitor is same like one of LILLIPUT  from US market.
7
Body/Appearance/Interior / t-bird PC
When I start this job I think about upper position of screen to look the booth: the road and  the screen.
9
Body/Appearance/Interior / t-bird PC
Comp is mount in luggage compartment  on steel  panel. I use the soft PPU mounts for computerto minimize  vibration . I also use the dc/dc converter to provide 15V to notebook
10
Body/Appearance/Interior / t-bird PC
Hello! I have install the pc comp in my t-bird year ago. Real interesting thing- it provide GPS navigation , the audio/video players,  EEC IV code reader, and documentation book for car. Here is some photo of installation.